The POLAMIX is similar to the 2CVTOOL in that you can offset, attenuate and invert signals, but it also acts as a 3 channel mixer. Try to use this with 3 LFOs for modulation mayhem!
Module power consumption: 2 mA
Inputs
- IN 1 - accepts any CV or audio signal
- IN 2 - accepts any CV or audio signal
- IN 3 - accepts any CV or audio signal
Outputs
- Bus CV - CV signal from MIDI
- Bus CTRL - CTRL signal from MIDI
- OUT (x2) - output of the 3 channel mix
- MULT - passive multiple, not connected to the module's circuitry
Controls
- OFFSET - Boost or lower the overall level of the output
- LEVEL 1 - Boost or lower the signal level of input 1.
- LEVEL 2 - As above for channel 2.
- LEVEL 3 - As above for channel 3.
Patch Suggestions
This module is excellent for combining CVs, e.g. an Envelope and LFO to go to one destination (e.g. Filter cut off frequency); you can set the level of modulation for each of 3 CVs input, and this is very tweakable during a performance.
It makes an excellent submixer to combine the oscillator outputs for different timbres, this could be the multiple outputs from one VCO or up to 3 separate ones...
Overview video by The Tuesday Night Machines: