Mixer Module Comparison Table August 22.
If the inputs or outputs say 1, this is mono. If the inputs or outputs say 2, this is stereo. If there is a number in brackets after, that is the quantity of that type; e.g. the 4ATTMIX has 4 of the same mono output.
Mono mixers are usually meant for CVs, and stereo mixers are usually meant for audio, but feel free to experiment! Several of the modules have audio/CV switches for improved sound quality.
Model
Cost (3/22)
Module Space
Inputs
Outputs
FX Send
FX Return
Level Meter
Headphone
Built in FX
Wiki Page
4ATTMIX
€29.00
1
4
1 (x4)
N
N
N
N
N
4ATTMIXFADER
€36.00
2
4
1 (x4)
N
N
N
N
N
Compact Mixer
€118.00
6
10
2
2
2(x2)
Y
Y
N
Dronx
€75.00
4
6
1(x3)
2
2
N
N
Y
Mixconsole
€80.00
4
4
2
2
2(x2)
Y
N
N
Mixer 4 4
€22.00
1
4
1(x2)
N
N
N
N
N
Polamix
€31.00
1
3
1(x2)
N
N
N
N
N
XMIX
€32.00
1
3
1(x2)
N
N
N
N
N
µ2Mix
€28.00
1/3
4
1(x2)
N
N
N
N
N
MM33
£60.00
2
3
3(x2)
N
N
N
N
N
- The 4 Attmix and 4AttMixFader are the same module electronically. The faders are really useful for audio mixing.
- The Compact Mixer has all connections available as AE or 3.5mm sockets.
- The Dronx also has distortion & a tone control for the overall mix.
- The Mixconsole has CV control of channel levels, (only one in AE), and is infinitely expandable with accessories, please see the Wiki page.
- The Mixer 4 4 has another ("B") mixer built in, which is 4 mono inputs (no control over level) to 2 mono outputs, great for CV mixing.
- The Polamix has an offset knob as it designed for CV mixing primarily.
- The Xmix has 3 other mixers built into the module, with little control over the input levels so mostly for CV mixing. These are a 4 to1 mixer, and 2 mixers that can be 4 to 1 or a 8 to 1 with 4 of the inputs attenuated at a fixed level.
- The µ2Mix has another ("B") mixer built in, which is 4 mono inputs (no control over level) to 2 mono outputs, great for CV mixing. On the main mixer, there are level controls for 3 inputs only. This module has to be mounted in the uBase module.
- The MM33 is a matrix mixer, i.e. any of the 3 inputs can go to any of the 3 outputs, their levels set by the knobs on the front panel. Very useful for CV modulation matrix, and for more complex audio patching.